indirect drive
The Asco solenoid valve series is an indirectly operated solenoid valve made of brass and with internal parts made of stainless steel, suitable for non-aggressive liquids and gases.
The Asco solenoid valve is an indirect drive solenoid valve for allowing or preventing liquids (with a viscosity up to 35 cStokes or mm²/s) and gases to pass through. Depending on the diameter, the response time can vary from a few tens of milliseconds for direct acting valves to a few hundreds or thousands of milliseconds for indirectly operated or membrane coupled valves. The maximum operating pressure is 30 bar.
Asco solenoid valves
Asco Dry solenoid valves
Indirect acting valve
2/2- or 3/2-way versions, NC or NO
Ports with gas thread from 1/8” to 2”
Internal openings from 1.1 to 45 mm
Material of valve body:
brass
Material of internal parts:
stainless steel
Elastomers:
NBR, EPDM or Viton® FPM
Operating pressures from vacuum to 30 bar
Coils in class F (155 ºC) or H (180 ºC)
Suitable for export
"*" indicates required fields