pvc injector
The best way to describe a venturi injector is: a section of pipe whose diameter first decreases (inflow) and then remains constant for a short length (throat), before gradually increasing again (outflow) to the original diameter. The speed of a flow can be determined from the pressure difference between the inflow and the throat, and the ratio of the diameters of the pipe and the throat.
Van der Ende Group’s injector is made of PVC. The connectors are 25-mm adhesive bonds and are attached to the venturi injector using screw connections. On request, the connectors can be provided with adaptor rings. The maximum operating pressure of this venturi injector is 10 bar.
Capacity:
up to 17.4 l/min
Maximum operating pressure:
10 bar
Process connection:
25 mm
Material of housing:
pvc
The Asco Dry solenoid valve series is a plastic valve that is ideal for aggressive liquids and gases, thanks to the valve body made of technopolymer and the internal parts made of stainless steel.
View productGeen gerelateerde producten gevonden.
"*" indicates required fields